Enphase Enpower / Encharge 10

EG4 18kPV All-In-One Hybrid Inverter - the ultimate power solution for any solar project! This innovative hybrid inverter combines the functionality of a grid-tied and off-grid system together while eliminating the need for charge controllers or transformers to create a convenient, independent, all-purpose powerhouse. It also boasts an extensive list of certifications and compliances, helping it meet typical electrical regulations.

Utilize solar power directly, battery storage, and grid power simultaneously to power your home, RV, or any other solar project with up to 12,000W of uninterrupted, continuous output. And in case of a power outage, the EG4 18kPV All-In-One Hybrid Inverter can be used as a backup power system without solar.

With remote monitoring capabilities, an improved UI, and a sleek design, this inverter is a top-of-the-line solution for your solar power needs. It boasts a user-friendly interface with an LCD display that offers user-configurable and easy-accessible button operation, including battery charging current, AC/Solar charger priority, and acceptable input voltage based on different applications.

Overall, with its easy plug-and-play installation, comprehensive certifications, and efficient management of power from solar, battery, and grid simultaneously, the EG4 18kPV All-In-One Hybrid Inverter is the ultimate solution for any solar power system. Don't compromise on utility - get the EG4 18kPV All-In-One Hybrid Inverter for uncompromising power and reliability!

Features:

Performance Components

• 18,000W PV input, 12,000W continuous output
• Stackable - Parallel multiple units together
• Closed loop communication with EG4 batteries
• Overload, short circuit & over temperature protection
• Line Balancing

All-In-One

• Everything needed to get started
• Simple plug-and-play install and inverter management
• Manages power from energy storage systems, and grid simultaneously
• 120/240V split phase
• Fully outdoor rated (Avoid direct sunlight)

Fully Remote monitoring & firmware upgrades

• Remotely Monitor & View Your System
• View solar yield, battery charging/discharging rate & import consumption
• Displays live energy data, battery charge and discharge limitations, and battery warning or fault.
• View the power curve from each day
• Displays key parameters over a 24-hour period
• Get historical data about your system for analysis and maintenance
• Update firmware remotely anywhere at anytime

Sizable Battery Rack Mount Systems from 5kWh to 30kWh in a single rack. Combine (2) Racks for 60kWh... And More! 

WARRANTY:

 5-Year Full Parts Replacement or Full Product Replacement Prorated Warranty from the date of purchase. 10-Year Extended warranty when used with an EG4 18kPV  

Your warranty must be registered within the first year of purchase or provide proof of purchase from EG4 authorized distributor to remain valid. If you choose not to register or can not provide proof of purchase, your warranty may be invalidated. This limited warranty is to the original purchaser of the product and is one time transferable only if the product remains installed in the original installation location. All parts exchanges are covered during the warranty period. Outside of the continental US, replacement shipping charges may apply.

The product that is purchased through the non-approved EG4 vendors is not covered under the warranty. A list of approved vendors can be found on our website. Reselling or removing the product from the original installation site will void the warranty.

Warranty Exclusions - EG4 Electronics has no obligation under this limited warranty for products subjected to the following conditions (including but not limited to):

• 1) Damages incurred during installation/reinstallation or removal
  2) Poor workmanship performed by an individual, installer, or a firm
  3) Damages caused by mishandling the product or inappropriate environmental exposure
  4) Damages caused by improper maintenance or operating outside the specified operating conditions
  5) Tampering, altering, and/or disassembly of the product
  6) Using product in applications other than what the manufacturer intended
  7) Lightning, fire, flood, earthquake, terrorism, riots, or acts of God.
  8) Any product with a serial number that has been altered, defaced, or removed
  9) Any unauthorized firmware updates/upgrades/patches
  10) Damages incurred from a voltage or current spikes due to open-loop lithium battery communications

EG4 product warranty is a limited warranty – EG4 limits its liability in the event of a product defect to repair or replacement in accordance with the terms of this limited warranty. EG4 is not responsible for any additional or indirect damages that may arise from the malfunctioning of the product. These damages could be incidental or consequential, including without limitation, any liability for the loss of revenue, profits, or time. EG4 shall not be liable for any direct or indirect loss of life, including but not limited to bodily injury, illness, or death arising from the misuse or mishandling of the product, whether caused by negligence or otherwise.

Return policy: Contact the original approved place of purchase before contacting EG4 for your return needs.

If the original purchase is made through EG4, then please contact us at support@eg4electronics.com +1 903-609-1988. Returns are accepted on a case-by-case basis.

Warranty Claims Procedure: In the event of a warranty claim, contact our customer service team either through phone or email to request an RMA. The warranty claims can be initiated on our website https://eg4electronics.com/warranty-registration/
Contact Information: support@eg4electronics.com +1 903-609-1988
*1: The warranty period depends on the type of the product.